![]() Higher specific gravities (like mill scale in water, where SG=5.7) result in much finer levels of filtration. Appreciable quantities of particles finer than 44 microns (for eSeries Separators) are also removed, as well as particles of lighter specific gravity. Up to 98% of particles 44 micron and larger for eSeries (eHTX and eJPX) Separators. quartz sand in freshwater), liquids of 31 SSU viscosity, and generally round particles, a single pass through a separator predictably removes up to 98% of particles 74 microns (0.0029 inches) and larger. In general, with a specific gravity ratio of 2.6 (e.g. Consult LAKOS for design assistance if the length of the suction line is more than 25’ or has several elbows or elevation changes.Īnswer: Solids-removal efficiency is affected by several factors, including the difference in specific gravity between the solids and the carrying liquid, the viscosity of the liquid, the particle shape, and any purging enhancement techniques. Pump NPSHR and piping to-and-from LAKOS Systems should be reviewed and sized accordingly. ![]() Minimum suction pipe size is equivalent to the system’s diffuser inlet. Note: All eTCX Premium Efficiency models are available in PLUS System configurations for filtration down to 0.35 microns.ġ. Side Stream and Closed Loop Specifications Premium Efficiency Models Side Stream Flow Range: 65 – 810 US GPM (15 – 184 m 3/hr)įiltration level: Removes fine solids 25 microns and largerīasin Sweeping Specifications Premium Efficiency Models Minimize tower nozzle clogging, protect basin floor from under-deposit corrosion, eliminate risk of injury associated with manual basin cleaning, and greatly reduce heat transfer loss in downstream equipment.īasin Sweeping Flow Range: 50 – 910 US GPM (11 – 206 m 3/hr).eTCX Systems feature LAKOS eHTX Centrifugal Separator, Premium Efficiency pump, higher capacity (12 liters) Solids Recovery Vessel and/or Fail-Safe Automated Purge valve, and SmartStart Control Panel.Premium Efficiency centrifugal filtration, independently tested, rated to remove up to 98% of solids 44 microns and larger in a single pass, and up to 99% of solids 25 microns and larger in recirculating applications.Controlling these factors leads to lower maintenance, improved chemical effectiveness, longer cooling tower and downstream equipment life, and a significant decrease in long-term water and energy costs. LAKOS Premium Efficiency eTCX Tower Clean Systems keep cooling tower basins free of suspended solids that cause scale, corrosion, fouling, and biological activity.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |